CHAPTER
5
Wiring Connections
For wiring connections made outside the cab apply dielectric silicone grease (P/N 222-0000-006) generously
on both the male and female ends of the connectors. Application of the grease will prevent corrosion of the pins
and wires.
Install the AutoBoom Node
AutoBoom Node Installed
FIGURE 1.
Mount the AutoBoom node (P/N 063-0130-013) to the node mounting plate (P/N 107-0171-802) using three
1.
3/8"-16 x 1-1/4" hex bolts (P/N 311-0054-106) and three 3/8"-16 zinc flanged lock nuts (P/N 312-1001-164).
Manual No. 016-0230-106
W iring Installation
C h a p t e r 5
CAUTION
Always connect the power cable as the last
step in the wiring process and verify that the
power leads are connected with the correct
polarity. Reversing power leads can cause
severe damage to the equipment.
21