Getting Started - Tektronix ATECTekRanger User Manual

This manual is arranged so that you can use the TFS3031 to
successfully test and analyze a fiber after reviewing sections 1 and 2
only.
Section 1 provides a quick overview of port, button, and softkey
functions, and describes how to set the instrument up for a test.
Section 2 explains how to test a fiber.
The TFS3031 includes the following equipment and standard
accessories. Before operating, check your instrument to make sure it
is complete.
TFS3031 with either one or two Laser Output ports installed as
ordered. See Table 5–12 on page 5–13 for a list of Laser Output
port options.
Connector adapter(s) as ordered. See Table 5–13 on page 5–13
for a list of connector adapter options. Connector adapters are
packaged separately and must be installed on the Laser Output
port.
Soft carrying case.
User Manual and Reference card.
NiCad battery (installed). The battery must be charged before
use. See page 3–2 for charging information.
Power/charger adapter and connecting power cord. Use for
recharging the battery and powering the TFS3031 independent of
the battery. See Table 5–11 on page 5–13 for a list of power cord
options.
Section 1.

Getting Started