Tektronix ATECTekRanger User Manual page 106

File Storage
If the File Content setup is set to Fiber Notes, only fiber notes are
loaded. The current test data is not cleared, but any existing fiber
notes are overwritten.
NOTE. Some TFS3031 software versions prior to version 8.0 allowed
the user to define all 12 fiber notes. If you load a fiber-notes file or a
waveform file with no "Fiber ID" or "Operator" notes, only the first
10 are loaded as notes 3 through 12. If the existing notes 1 and 2
have the titles "Fiber ID" and "Operator," these are loaded as notes
1 and 2, and the succeeding 10 notes are loaded as notes 3 through
12.
Load softkey options are:
Use the arrow keys to select the file before pushing the
Push the
file.
to be loaded.
2–38
. Loads the selected file onto the screen.
softkey.
softkey to display the file after it has been loaded.
Displays the fiber notes (if any) for the selected
. Selects the memory source that contains the file
TFS3031 TekRanger/TekRanger 2 User Manual