Tektronix ATECTekRanger User Manual page 63

External Port
External Port specifies the communications port (located on the side
panel) that connects the TFS3031 to the printer or personal computer.
If connected to a computer, set External Port to Serial.
Selections are Serial or Parallel port. Factory default is Parallel port.
Print Content
Print Content specifies the type of test data to be printed. The
selections are:
Trace–prints waveform, instrument setups, fiber notes, and event
notes.
Table–prints event table, event notes, fiber notes, and instrument
setups.
Trace and Table–prints waveform, instrument setups, fiber
notes, event table, and event notes.
Setups–prints instrument setups only.
Fiber Notes–prints fiber notes only.
Factory default is Trace and Table.
Company Name
Company Name includes the name of your company (or other
identifying text) as part of the power-on screen and on printouts. Up
to 24 characters can be included using the editing procedure accessed
by pushing the
name.
TFS3031 TekRanger/TekRanger 2 User Manual
softkey. Factory default is no
Setups
1–43