Tektronix ATECTekRanger User Manual page 51

Setups
TRACE DISPLAY Setups
Trace display setups turn on and off data included on the waveform
screen.
Event
In the waveform display, Event turns display of measurement data
for the event closest to the currently active cursor on and off. Event
data is displayed at bottom screen.
Selections are On or Off. Factory default is On.
Cursor A–B
In the waveform display, Cursor A–B turns display of the difference
in measurement data between the cursors on and off. Measurement
data includes loss in dB, distance, and loss/distance. Cursor A–B
data is displayed at top screen.
Selections are On or Off. Factory default is On.
Splice Loss
In the waveform display, Splice Loss turns display of the splice loss
measurement at each cursor on and off. Moving a cursor causes the
TFS3031 to recalculate the splice loss at the new cursor location.
Cursor A and B splice loss data is displayed at top screen.
Selections are On or Off. Factory default is Off.
Reflectance
In the waveform display, Reflectance turns display of the reflectance
measurement at each cursor on and off. Moving a cursor causes the
TFS3031 to recalculate the reflectance at the new cursor location (if
a reflection exists). Cursor A and B reflectance data is displayed at
top screen.
Selections are On or Off. Factory default is Off.
TFS3031 TekRanger/TekRanger 2 User Manual
1–31