Tektronix ATECTekRanger User Manual page 120

Copying Files to a Personal Computer
Step 2. Access TFS3031 storage (internal memory or floppy disk)
Step 3. Push the
Step 4. To prepare your computer, connect the computer COM1 or
Step 5. Access the source directory in the computer for file transfer.
Step 6. Install the TDS application software in the computer.
2–52
2. Use the arrow keys to establish the following setups
according to the requirements of your computer:
External Port
Select Serial port.
Baud Rate
Select baud rate as needed.
Flow Control
Set flow control as needed (never set to XON/XOFF).
3. Push the
screen.
for file transfer.
1. Push the
2. Push the
3. Push the
appropriate storage medium.
A pop-up message on the TFS3031 screen prompts you to
prepare your computer for file transfer.
COM2 port (COM1 is the default) to the TFS3031 serial
port using the serial cable (an optional accessory – see Table
5–4 on page 5–5).
TFS3031 TekRanger/TekRanger 2 User Manual
softkey to resume the waveform/table
softkey.
button to choose the Copy option.
softkey to access the
softkey.