Programming Patient-Monitor Type - GE Solar 7000 Service Manual

Programming
Patient-Monitor Type
Revision J
CONFIGURATION: Configuring a Monitor
The PATIENT-MONITOR TYPE selection allows the user to select the
type of monitor desired, i.e adult, neonatal or operating room. Different
alarms and parameters are activated for each selection. This menu item
is part of the SERVICE MODE to keep a casual user from changing the
type of the monitor.
CAUTION
Each time the patient-monitor type is changed, the
ADMIT MENU function will default to STANDARD
configuration.
parameters may be changed.
Do the following procedure to change the PATIENT-MONITOR TYPE.
Refer to the operator's manual for a full description of alarm, limit, and
parameter changes for each monitor type.
1. To access PATIENT-MONITOR TYPE option, execute the following
menu sequence starting from the MAIN menu:
MONITOR SETUP
SERVICE MODE
Password
Enter day and month from monitor screen with leading zeros.
(July 4 = 0407)
PATIENT-MONITOR TYPE
↑
2. Rotate Trim Knob control to select the type of environment the
monitor will be used in.
3. Press Trim Knob control to exit. Your selection will be displayed at
the top of the screen after the time.
Solar 7000/8000/View Patient Monitor
414993-001
Be aware that some
↓
alarms and
6-5