Exterior Cleaning; Cleaning The Display; Cleaning The Touch Screen Display - GE Solar 7000 Service Manual

Exterior Cleaning

Cleaning the Display

Cleaning the Touch
Screen Display
3-6
MAINTENANCE: Cleaning
Clean the exterior surfaces with a clean, lint-free cloth and one of the
cleaning solutions listed in the table above.
• Wring the excess solution from the cloth. Do not drip any liquid into
open vents, switches, plugs, or connectors.
• Dry the surfaces with a clean cloth or paper towel.
To clean the display, follow the recommendations of the display's
manufacturer. In general you will need to use a soft, clean, lint-free cloth
dampened with a glass cleaner.
CAUTION
To avoid getting liquid into connector openings, do not
spray glass cleaning or general cleaning solutions
directly onto the product's surface.
1. Turn OFF the mains power switch on the monitor and disconnect it
from the power source.
2. Clean the screen with an AMMONIA FREE glass cleaner and lint
free cloth.
CAUTION
Do not spray any glass cleaning solution or any general
cleaning solutions directly onto the monitor's display
surface. Always dampen the towel and then clean the
screen.
Solar 7000/8000/View Patient Monitor
414993-001
Revision J