Copy Unit Defaults; Degauss (Solar 7000 Only); Time And Date - GE Solar 7000 Service Manual

Copy Unit Defaults

Degauss
(Solar 7000 Only)

Time and Date

4-32
TROUBLESHOOTING: Service Menus
This menu option is used to copy Monitor Defaults from one monitor to
another monitor. Refer to "Transfer Monitor Defaults" in Chapter 6:
"Configuration" for complete details.
This menu selection is used to degauss the Solar 7000 display. Select
YES to degauss the color display periodically or whenever the red color
becomes impure (not true red). Note that the display is automatically
degaussed every time the unit is turned ON at the back switch. Once the
display is manually degaussed, it cannot be degaussed again for at least
10 minutes.
This menu selection allows changes to the time and date and may affect
the time and date for the entire monitoring network.
WARNING
This menu should rarely be used because patient
histories will be lost.
This procedure is described in "Programming Time and Date " in Chapter
6: "Configuration."
Solar 7000/8000/View Patient Monitor
414993-001
Revision J