Copy Error Logs
Eject Floppy
Revision J
CONFIGURATION: Advanced User Procedures
Once the START COPY button is selected a new display is shown that
confirms the file source device. The other options are to eject the floppy
diskette or to start the copying process.
Rotate the Trim Knob control to select the desired function. Then press
the Trim Knob control to start.
Once the copy function begins the START COPY button changes to show
the function: "copying."
When selected this option just causes a floppy diskette to be ejected from
the central station's disk drive.
NOTE
If the floppy diskette does not eject, a thin tool such as a
straightened paper clip can be inserted in the small
round hole under the disk slot. By pressing on the
mechanical release bar inside the drive the floppy
diskette can be forcibly ejected.
Solar 7000/8000/View Patient Monitor
414993-001
6-27