Reviewing Event Logs; Accessing Event Logs - GE Solar 7000 Service Manual

Reviewing Event
Logs

Accessing Event Logs

6-28
CONFIGURATION: Advanced User Procedures
This procedure describes how to review the event logs of a monitor.
WARNING
This procedure is intended for use by service personnel
with advanced troubleshooting skills.
Some of the information recorded in the event logs is useful for field
troubleshooting. The details included here will serve as an introduction
to the event logs and provide basic information about what you can learn
from them.
At the monitor, execute the following menu sequence, starting from the
MAIN menu:
MONITOR SETUP
SERVICE MODE
Password
Enter day and month from monitor screen with leading zeros.
(July 4 = 0407)
REVIEW ERRORS
Select the VIEW SCOPE EVENTS option to scroll through the log of
events.
The event log in a monitor holds 500 events that can be accessed by
turning the Trim Knob control. You may select PRINT to print out an
event.
To clear all the events in the error log, select CLEAR SCOPE EVENTS
menu option. Be aware that once the clear menu option is executed, all
selected events in memory are erased.
Solar 7000/8000/View Patient Monitor
414993-001
Revision J