Connect To Host Patient Monitor; Connect To Transport Bedside Monitor; Connect To Bedside Monitor - GE PDM Service Manual

Connect to host patient monitor

Connect to transport bedside monitor

Connect to bedside monitor

2030047-001A
If using the Patient Data Module with a transport bedside monitor,
1. Guide the mounting rails of the Patient Data Module onto the transport dock
mounting rails.
2. Slide the Patient Data Module toward the ePort until the locking key secures it to
the transport dock.
If using the Patient Data Module with a bedside monitor,
1. Connect one end of the ePort host interface cable to the Patient Data Module
ePort connector.
2. Connect the other end of the ePort host interface cable to the Solar to Patient
Data Module adapter on the back of the Solar 8000M/i patient monitor.
Patient Data Module
Installation
3-5