Setpoint (Hardwired)
If the setpoint source is Remote (Hardwired), the operator can decide which setpoint to
provide via the 4W20 mA signal. The locally set setpoint thus remains a constant value and
ozone production can be varied via the external setpoint.
Gas Flow
•
Generator
Refer to System Specification.
Converter
•
Power
Converter Power
The Converter Power is displayed as follows:
SP
•
PV
•
Gas Flow Generator
The Gas Flow Generator is displayed as follows:
SP
•
PV
•
Manual_SMOevoPLUS_eng_01.2019.doc
The external setpoint via the 4W20 mA signal corresponds to
0W100 % Gas Flow of the Generator.
The external setpoint via the 4W20 mA signal corresponds to
0W100 % Converter Power.
Setpoint in % referred to Converter Power 0WX kW.
Actual value in kW, showing the actual Process Value.
Setpoint in Nm³/h.
Actual value in Nm³/h, showing the actual Process Value.
Manual Ozone Generating System SMOevo
PLUS
Operation
page 99 of 179