Production Settings (Screen 03.00.01) Power / Gas Flow Control - Xylem WEDECO SMOevo PLUS Series Original Manual

8.11 Production Settings (Screen 03.00.01) Power / Gas Flow
Control
Production Settings screen in system control mode Power / Gas Flow Control
With this control mode, the setpoints Converter Power and Gas Flow Generator must be
preset.
Signal
(Setpoint)
Converter
Power
Gas Flow
Generator
* only one signal is transferable via the external customer terminal block, depending on the
selected setpoint presetting.
Manual_SMOevoPLUS_eng_01.2019.doc
Remote
Local
(Hardwired)
X
4W20 mA = 0W100 %
Converter Power*
X
4W20 mA = 0WX Nm³/h
Gas Flow*
Manual Ozone Generating System SMOevo
Remote
(Network)
X X
X X
PLUS
Operation
Remote
(Wedecontrol)
X
X
page 98 of 179