Table of Contents
Advertisement
8.23 Alarms [Current] (Screen 06.00)
Display of the current fault messages incl. acknowledgment button.
Every HMI screen containing the message line allows accessing this screen by pressing on
the bottom right push button.
Fault messages are diplayed including PLC address, date, and status.
Status K:
Fault message appears. Fault is present.
Status (K)Q:
After successful remedy of the fault, the fault message has been
acknowledged
Status (KQ)G:
Fault message has successfully been acknowledged. The fault has been
rectified
Press the acknowledgment button to acknowledge current alarms.
Signalization of a fault message. The push button will appear in every HMI
screen.
By pressing the push button, a pop up window will open automatically
showing the currently present fault messages.
Manual_SMOevoPLUS_eng_01.2019.doc
Manual Ozone Generating System SMOevo
PLUS
Operation
page 125 of 179
Advertisement
Table of Contents
