Xylem WEDECO SMOevo PLUS Series Original Manual page 118

Controller Output (Option WCL: Wedeco Closed Loop)
If the system is equipped with a Wedeco Closed Loop cooling water system, the speed of the
cooling water pump is set automatically via the PLC. The controller output is controlled
depending on the power consumption of the converter. For operating data,
sheet.
Status
The operational status of the periphery is displayed.
Disabled
Stand-by
Manual Operation
Normal Operation
Fault
Start-up Delay
Turn-off Delay
Turn-off Delay (T = Time)
Delay time after the stop sequence is initiated in Automatic Mode
The remaining time until stopping is displayed in the output field.
Manual_SMOevoPLUS_eng_01.2019.doc
Manual Ozone Generating System SMOevo
Is turned off
is ready for operation and waiting for the start signal
is operated in Manual Mode
is operated in Automatic Mode
General periphery or System Fault
starts after delay time
stops after delay time (Turn-off Delay)
PLUS
Operation
refer to the data
page 118 of 179