Table of Contents
Advertisement
GREEN
flashing light
GREEN
continuous light
RED
flashing light
RED
continuous light
A fault can be acknowledged by means of the system switch (turn to position R) or via the
HMI.
Refer to Chapter Alarms / Events (Current).
After successful acknowledgment, the system can be restarted.
8.3.3 Stopping the Ozone Production
Turn the system switch to position 0 to initiate the stop sequence of the ozone system.
The system is purged with the relevant feed gas for 2 minutes.
Where applicable, the associated periphery shuts down.
After completion of the stop sequence, the ozone system is in stand-by state again.
Manual_SMOevoPLUS_eng_01.2019.doc
Manual Ozone Generating System SMOevo
The system is in start up, purging, or shutdown phase.
The system is in normal operation (ozone production).
A warning message is active.
A fault has occured.
PLUS
Operation
page 81 of 179
Advertisement
Table of Contents
