Ozone Destructor Settings (Option Wod) (Screen 04.00) - Xylem WEDECO SMOevo PLUS Series Original Manual

8.18 Ozone Destructor Settings (Option WOD) (Screen 04.00)

The basic settings of the WOD can be changed in this level. Basic settings are the
Operating Mode, Status and the Turn off Delay after ozone production is stopped.
Operating Mode
Automatic
Manual
The ozone system cannot be operated if at least one periphery is in the
Manual operating mode. This state is indicated by the operating message:
"System not ready for operation. At least one device not in Automatic Mode"
Manual_SMOevoPLUS_eng_01.2019.doc
Manual Ozone Generating System SMOevo
The ozone destructor may always be operated in Automatic Mode,
i.e. start and shutdown is carried out automatically via the start and
stop sequence.
If the ozone destructor is stopped in Automatic Mode, it turns off not
before the delay time has elapsed.
The Manual Mode is a kind of maintenance function. In Manual
Mode, an On/Off switch appears allowing to start or shut down the
ozone destructor manually.
Starting and stopping is immediate and without a preset delay time.
PLUS
Operation
page 119 of 179