Operation Settings (Screen 02.01) - Xylem WEDECO SMOevo PLUS Series Original Manual

8.8 Operation Settings (Screen 02.01)

In the Operation Settings screen, general system options can be selected as follows:
Purge Mode
When turning the system switch from Normal Operation (position I) to position 0, the system
stops via the automatic stop sequence.
The Purge Mode, in which the system is purged with the feed gas in order to remove residual
ozone from the system, can be parameterized via the input fields.
T = Time
F = Flow
Manual_SMOevoPLUS_eng_01.2019.doc
Time during which the Purge Mode is active.
Percentage flow value in relation to the maximum flow rate of the
system.
Manual Ozone Generating System SMOevo
PLUS
Operation
page 91 of 179