System Settings (Screen 02.00) - Xylem WEDECO SMOevo PLUS Series Original Manual

8.7 System Settings (Screen 02.00)

In the System Settings screen, general system options can be selected as follows:
Operating Mode
The ozone production can be started locally or externally.
Depending on the operating mode, the system can be started or stopped externally via the
terminal block, a network connection or via a Wedecontrol process control system connection.
The status of the external commands can be checked in the Customer Interface screen.
Local
Remote
(Hardwired)
Remote
(Network)
Remote
(Wedecontrol)
The system can be stopped at any time by deactivating the remote signal or turning the
system switch to position 0.
Manual_SMOevoPLUS_eng_01.2019.doc
The system is switched on or off via the system switch only.
The system switch must be in position I. The system is switched on via
remote start contact
The system switch must be in position I . The system is switched on via
remote network command.
The system switch must be in position I . The system is switched on via
remote Wedecontrol command.
Manual Ozone Generating System SMOevo
PLUS
Operation
page 87 of 179