Xylem WEDECO SMOevo PLUS Series Original Manual page 168

P&ID Component
No.
03.1.15 Motor control
valve with
actuator
03.1.20 Check valve
03.1.01 Solenoid valve
Piping
Assembly: Cooling system
07.1.15 Flow meter
07.1.25 Temperature
sensor
07.1.50 Flow meter
07.1.55 Solenoid valve
Piping
Assembly: Ambient Air Monitoring
34.1.10 Ozone Sensor
Assembly: Electrical Components / Electrical Cabinet
Fan
Filter mat
Electrical
components
Assembly: Safety equipment
Warning signs,
pictographs
1) dependent on ambient conditions
2) The ozone sensor includes a self-test. If an earlier sensor change is
necessary, this is shown in the display of the instrument ("Check sensor"),
refer to the manual of the
Manual_SMOevoPLUS_eng_01.2019.doc
Manual Ozone Generating System SMOevo
What to do
Visual inspection
Visual inspection
Visual inspection
Visual inspection
Visual inspection
Visual inspection
Visual inspection
Visual inspection
Visual inspection
Check
Sensor replacement
Visual inspection
Filter mat cleaning,
replacing filter mats,
if necessary
Checking all
connections
for tightness.
Visual inspection
manufacturer.
Maintenance
Interval
monthly
every 6 months
every 6 months
weekly
every 6 months
every 6 months
monthly
monthly
weekly
every 6 months
every 6 months 2)
weekly
at least
1)
every 6 months
annually
weekly
page 168 of 179
PLUS