PLUS
Manual Ozone Generating System SMOevo
Operation
Ozone Dose Trim Output
After every control interval, a setpoint / actual value comparison is carried out by the Dose
Trim function. Depending on the difference determined, there are changes in the trim output.
The correction level is displayed graphically via the correction bar.
The correction value is added to the Ozone Dose and thus forms the process feedback
variable in order to achieve an optimized ozone introduction.
Refer to screen 03.00.04
Production Settings.
Manual_SMOevoPLUS_eng_01.2019.doc
page 111 of 179