Option Cp (Custom Positioning); Option Fh (Flashing Light Horn); Option M1 And M2 Ozone Monitoring; Option Z1 Nitrogen Boost - Xylem WEDECO SMOevo PLUS Series Original Manual

5.4.3 Option CP (Custom Positioning)

The option CP includes two skids on which the ozone system is mounted. The skids can be
positioned separately with a maximum distance of 8 m.
This option applies to SMOevo

5.4.4 Option FH (Flashing Light Horn)

Refer to Chapter Subassembly 34: Ambient Air Monitoring.

5.4.5 Option M1 and M2 Ozone Monitoring

The option Ozone Monitoring is available in two versions:
M1 Measurement and display of ozone concentration by ozone monitor HC-400
plus.
M2 Measurement, display, and control of ozone concentration by ozone monitor
BMT 964 C.

5.4.6 Option Z1 Nitrogen Boost

The option Nitrogen Boost includes addition of a low quantity of air or nitrogen respectively to
the pure oxygen.
This option allows a more efficient ozone generation in case of too high oxygen purity.
Refer to Chapter Subassembly 01: Gas Supply.
Manual_SMOevoPLUS_eng_01.2019.doc
Manual Ozone Generating System SMOevo
PLUS
510 up to SMOevo
Refer to Chapter Control of Required Ozone Mass
System Description
PLUS
960.
PLUS
page 62 of 179