Figure 8.4 Positive/Negative Pulse Width; Figure 8.5 Pulse Width Trigger Setting Menu - Rigol HDO1000 Series User Manual

In this oscilloscope, positive pulse width is defined as the time difference between the
two crossing points of the trigger level and positive pulse; negative pulse width is
defined as the time difference between the two crossing points of the trigger level
and negative pulse, as shown in the figure below.
Trigger Type
Click or tap Type drop-down button to select "Pulse".
After a trigger type is selected, the current trigger setting information (including
trigger type, trigger source, and trigger level) is displayed in the trigger information
label at the top of the screen, as shown in the figure below. The information will
change based on the trigger settings.
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
A
+Width
-Width
A

Figure 8.4 Positive/Negative Pulse Width

Figure 8.5 Pulse Width Trigger Setting Menu

Triggering the Oscilloscope
B
Trigger Level
B
Trigger Level
HDO1000 User Guide
71