Logic Operation - Rigol HDO1000 Series User Manual

Math Operation
• Peak Search ON/OFF: click or tap the Peak Search on/off switch to enable or
disable the display of the peak search window. By default, it is OFF.
• Peak Number: click or tap the Peak Number input field and use the pop-up
numeric keypad to set the number of peaks or use the corresponding
multipurpose knob to set the value. Its range is from 1 to 15. Its default value is
5.
• Threshold: click or tap the Threshold input field to set the threshold of the peak
with the pop-up numeric keypad. The range of the threshold is related to the
current FFT scale and offset.
• Excursion: click or tap the Excursion input field to set the excursion of the peak
or use the corresponding multipurpose knob to set the value. The minimum
value of Excursion is 0 and its unit is dB.
• Table Order: in Table Order, select Amp Order or Freq Order as the sorting
mode. By default, it is "Amp Order".
Click or tap Export, then the save setting interface is displayed. You can export the
peak search results to the internal memory or the external USB storage device in CSV
format. In the menu, click or tap File Name input field to set the file name; click or
tap File Path input field and the disk management menu (
displayed. Select the desired location to save the file and then click or tap Save to
save the peak search results.
Clicking or tapping the icon
search menu.
9.4

Logic Operation

In the Math menu, click or tap the Operator drop-down button to select the desired
math operation. The logic operations supported by this oscilloscope include A&&B,
A||B, A^B, and !A. After selecting the desired logic operation in the drop-down button
of Operator, you can configure its settings for the selected logic operation type.
HDO1000 User Guide
126
at the right side of Peak Search can close the peak
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Disk Management
) is