Rigol HDO1000 Series User Manual page 41

6. Trigger Label
- Displays the trigger information of the system, including the trigger type,
trigger level, trigger mode, and etc.
- Click or tap the trigger label, then the trigger setting window is displayed. You
can set the parameters for the trigger.
7. Function Toolbar
Provides STOP/RUN, XY, Default, Flex Knob, Navigate keys and some function
keys in the function navigation menu.
8. Result Sidebar
Displays the measurement results and statistics of various functions. Click or tap
at the lower-right corner of the screen to open or close the "Result" sidebar.
9. Notification Area
Displays USB icon, LAN icon, the sound icon, remote control icon as well as data
and time. You can click or tap this area to open the "Utility" menu.
- USB storage device icon: When a USB storage device is detected,
displayed.
- LAN icon: When the LAN interface is successfully connected,
- Sound icon: In the "Utility" menu, click or tap Setup > Beeper to enable or
disable the sound. When on,
displayed. You can simply click or tap the icon to enable or disable the sound.
- Remote control icon: When you use Web Control to control the instrument
remotely,
- Date and time: displays the system date and time. For how to set the data and
time, please refer to
10. Split-screen Display
If you enable multiple functions, multiple windows can be displayed on the screen
at one time.
11. Math Labels
Displays the on/off state, operation type, and vertical scale.
12. Channel Labels
- Display the on/off status of CH1~CH4.
- Display the channel coupling mode.
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
will be displayed; when off,
will be displayed.
Display Date and Time
is displayed.
will be
.
HDO1000 User Guide
Quick Start
will be
27