Quick Start; General Inspection; Appearance And Dimensions; Figure 4.1 Front View - Rigol HDO1000 Series User Manual

4

Quick Start

4.1

General Inspection

1. Inspect the packaging
If the packaging has been damaged, do not dispose the damaged packaging or
cushioning materials until the shipment has been checked for completeness and
has passed both electrical and mechanical tests.
The consigner or carrier shall be liable for the damage to the instrument resulting
from shipment. RIGOL would not be responsible for free maintenance/rework or
replacement of the instrument.
2. Inspect the instrument
In case of any mechanical damage, missing parts, or failure in passing the electrical
and mechanical tests, contact your RIGOL sales representative.
3. Check the accessories
Please check the accessories according to the packing lists. If the accessories are
damaged or incomplete, please contact your RIGOL sales representative.
Recommended Calibration Interval
RIGOL suggests that the instrument should be calibrated every 18 months.
4.2

Appearance and Dimensions

Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.

Figure 4.1 Front View

Quick Start
HDO1000 User Guide
11