Parameter Setting Method; Figure 4.15 Drag Gesture - Rigol HDO1000 Series User Manual

Quick Start
• Drag the window controls to change the position of the window (e.g. numeric
keypad).
• Drag the cursor to move the cursor.
• Drag the trigger cursor to change the trigger level.
• In multi-window display, drag one of the displayed windows to change its
position on the display.
4.6

Parameter Setting Method

For this instrument, you can use the knobs and touch screen to set parameters. The
common parameter setting methods are as follows:
• Method 1: Some parameters can be adjusted by rotating the front-panel knobs.
• Method 2: Click or tap the input field of a specified parameter, then a virtual
keypad is displayed. Complete the parameter setting with the keypad.
Input Chinese and English Characters
When naming a label, this instrument supports Chinese/English input method. The
following part introduces how to input Chinese and English characters with the
Chinese/English input method.
• Input English Characters
HDO1000 User Guide
30

Figure 4.15 Drag Gesture

Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.