Digital Filter; Figure 9.12 Digital Filter Menu - Rigol HDO1000 Series User Manual

Math Operation
Grid
For setting methods, refer to the descriptions in
9.5

Digital Filter

In the Math menu, click or the Operator drop-down button to select the desired
math operation. The digital filters supported by this oscilloscope include: low-pass
filter, high-pass filter, band-pass filter, and band-stop filter.
• LowPass only allows the signals whose frequencies are lower than the current
upper limit frequency to pass.
• HighPass only allows the signals whose frequencies are higher than the current
lower limit frequency to pass.
• BandPass only allows the signals whose frequencies are higher than the current
lower limit frequency and lower than the current upper limit frequency to pass.
• BandStop only allows the signals whose frequencies are lower than the current
lower limit frequency or higher than the current upper limit frequency to pass.
Operation Result Display Window
Click or tap the Operation on/off switch to enable or disable the display of the
operation result window. The source and the vertical scale parameters are displayed
at the top of the window, as shown in the figure below.
HDO1000 User Guide
130
To Set the Screen Grid

Figure 9.12 Digital Filter Menu

Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
.