Quick Start
b. Install the option by sending SCPI commands. For details, please refer to
HDO1000 Programming Guide.
c. After installation, a prompt message "Option activated successfully" is
displayed. After the option has been installed, it is recommended to restart the
instrument.
TIP
•
Only 1 option license file of one instrument is allowed to be stored in the same USB
storage device, but the USB storage device can store the option license file of several
different instruments. You are not allowed to modify the licensed filename.
•
During the installation process, you are not allowed to power off the instrument or pull
out the USB storage device.
•
Sending the SCPI commands (:SYSTem:OPTion:INSTall <license>) to install options is
supported. Installing options by inputting the license code manually is not supported.
HDO1000 User Guide
38
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.