Rigol HDO1000 Series User Manual page 131

Source
Click or tap the drop-down button of SourceA or SourceB to select CH1, CH2, CH3,
or CH4. When a source channel is selected, the selected channel automatically
switches to the ON state.
Scale
Scale is used to set the vertical scale of the operation result. You can set the vertical
scale in the following ways.
• In Vertical menu, rotate the corresponding multipurpose knob on the front
panel or click or tap the icon at the right side of the input field of Scale to
increase or decrease the scale value. You can also click or tap the input field to
input a specific value with the displayed numeric keypad.
• Close the menu and then adjust the vertical scale with the pinch & stretch
gesture on the touch screen. You can also rotate the corresponding
multipurpose knob on the front panel to adjust the vertical scale. Please refer to
Front Panel Overview
Offset
Offset is used to set the vertical offset of the operation result. You can set the vertical
offset in the following ways.
• In Vertical menu, rotate the corresponding multipurpose knob on the front
panel or click or tap the icon at the right side of the input field of Offset to
increase or decrease the scale value. You can also click or tap the input field to
input a specific value with the displayed numeric keypad.
• Close the menu and then adjust the vertical offset with the drag gesture on the
touch screen. You can also rotate the corresponding multipurpose knob on the
front panel to adjust the vertical offset. Please refer to
configure the front-panel multipurpose knobs.
Invert
Invert is used to enable or disable the inverted display of the waveform. For setting
methods, refer to descriptions in
Waveform
This oscilloscope supports Main (default) and Zoom.
• Main indicates that the measurement range is within the main time base region.
• Zoom indicates that the measurement range is within the zoomed time base
region.
To use "Zoom", first enable the
Horizontal System
(
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
to configure the front-panel multipurpose knobs.
To Invert a Waveform
Zoom Mode (Delayed Sweep)
).
Math Operation
Front Panel Overview
.
in the Horizontal menu
HDO1000 User Guide
to
117