Internal Components - 2gig Technologies EDGE Installation Manual

INTERNAL COMPONENTS

This illustration details the internal components of the 2GIG EDGE Panel.
2GIG EDGE Panel - Internal Components
B
A
Callout Component
A Third Hand Hanging Strap
B
USB Port
C
Piezo Sounder
D Terminal Block
E
Backup Battery
F Receiver Board
G Speaker
Installation Guide for the 2GIG EDGE Security Panel
G
A durable hanging strap provides installers with an extra hand when installing and
servicing the 2GIG EDGE Panel.
A built-in USB port for updating the panel's firmware.
An internal 85-dB Piezo Sounder.
Two terminal blocks with screw-terminal positions for connecting the 2GIG EDGE Panel to
electrical power (DC IN+/DC IN –), hardwire loops/wired zones (ZONE1/ZONE2), solid state
output (BELL+/BELL-), and an open collector output (OCL1/OCL2).
A backup battery used with the 2GIG EDGE Panel to extend service during a power outage.
The main receiver board.
An internal speaker that sounds, navigation tones, alert tones, and supports crystal clear
2-Way Voice communication with echo suppression.
8
C
D
E
F
Description