Transmission Id (Txid); Normal State; Sensor Loop - 2gig Technologies EDGE Installation Manual

2860-eSeries CO Detector (USA)
1026-2GIG CO Detector
2069-eSeries FireFighter SMK/CO Listener
1069-FireFighter SMK/CO Listener
2070-eSeries Water Sensor
1070-2GIG Fall Detector Pendant (2GIG -F1-345)
1072-2GIG Smoke Ring
2868-eSeries Panic
0868-2GIG Panic Button Remote
1071-2GIG Personal Help Button (2GIG-PHB-345)
2865-eSeries Outdoor Door/Window
0865-2GIG Outdoor Door/Window Sensor
2065-eSeries Flood Sensor
1065-2GIG Floor Sensor
2061-eSeries Tilt Sensor
1062-2GIG Tilt Sensor
1063-2GIG Doorbell
2873-eSeries Takeover Module
0873-2GIG Takeover Module
2067-eSeries Repeater
1067-2GIG Repeater
0655-Existing Door/Window Contact
0609-Existing Motion Detector
0475-Existing Glass Break Detector
0616-Existing Smoke Detector
0692-Existing CO Detector
0708-Existing Heat Sensor
0556-Existing Flood/Temp Sensor
1061-Tilt Sensor
0470-HW R-D/W '5818MNL'
0637-Honeywell D/W '5816'
0530-HW PIR '5894PI'
0533-HW PIR '5890'
0519-HW Glass Break '5853'
0589-HW Smoke '5808W3'
0557-HW Heat Sensor '5809'
0624-HW Flood Sensor '5821'
Keyfobs
0000-Other
2866-eSeries Key FOB
0866 - KEY2-345
0577 - Exiting Keyfob Remote
*NOTE: eSeries sensors are only compatible with the 2GIG EDGE panel .

Transmission ID (TXID)

Required for all wireless zones.
It's a 7-digit Transmission ID (TXID) that the Control Panel uses to
identify a sensor TXID is printed on the sensor box or the label on the
sensor body.

Normal State

This applies only to wired zones.
Setting
Normally Open (EOL optional)
Normally Closed (EOL optional)

Sensor Loop

Required for all wireless zones. Refer to the device manual.
59
Copyright © 2022 Nortek Security & Control LLC