2gig Technologies EDGE Installation Manual page 34

Smart Areas Assignment
1 . Highlight Smart Areas Assignment.
2 . Under Smart Areas Assignment, choose a Smart Area (Partition) for the
keyfob.
3 . Tap  to move to the next option.
Emergency Key
1 . Highlight Emergency Key.
2 . Choose one of these options:
¾ Disabled: Turns the emergency key function OFF.
¾ Auxiliary: Triggers an auxiliary alarm.
¾ Audible: Triggers an audible alarm on the system.
¾ Silent Panic: Triggers a silent distress signal.
3 . Tap  to move to the next option.
Fob Can Disarm
1 . Highlight Fob Can Disarm.
2 . Under Fob Can Disarm, choose Enabled or Disabled.
3 . Tap  to move to the next option.
Arm with No Entry Delay
1 . Highlight Arm with No Entry Delay.
2 . Choose Enabled or Disabled.
3 . Tap  to move to the next option.
Fob Output
1 . Highlight Fob Output.
2 . Choose one of these options:
¾ Disabled: This deactivates the option.
¾ Toggle Output: Press the Auxiliary (*) button to control the device
connected to the Open Collector Output #1. For example: open and
close a garage door.
¾ Momentary Output: Press the Auxiliary (*) button to change the
state of the device connected to the Open Collector Output #1. For
example: turn the system-controlled lights ON or OFF.
Installation Guide for the 2GIG EDGE Security Panel
34