Troubles; Q401: Radio Modem Network Failure Time, In Minutes; Q402: Radio Network Failure Causes Trouble; Q403: Radio Network Failure Reports - 2gig Technologies EDGE Installation Manual

Troubles

Q401: Radio modem network failure time, in minutes

Configures the system to display a trouble alert on the touchscreen when the system loses its cellular radio network connection. The number of
minutes you specify here defines the amount of down time that must pass before the system issues a trouble alert report. Once network service is
restored for five (5) minutes, the trouble alert condition automatically clears itself.
Choose one of these options:
»
0 Minutes: Turns the feature OFF. The system does not issue a trouble alert
»
1-255 Minutes: Turns the feature ON. Use the touchscreen's numeric keypad to enter the number of minutes between 1 and 255.
»
† 30 Minutes: Turns the feature ON and issues a trouble alert on the 2GIG EDGE Panel after 30 minutes of down time.

Q402: Radio network failure causes trouble

Configures the system to display a trouble alert on the touchscreen when it logs a trouble alert condition with the cellular network connection.
The 2GIG EDGE Panel will display an alert message on the touchscreen after the number of minutes specified in
above expires.
time, in minutes (0-255)
Choose one of these options:
»
† Enabled: Turns the feature ON. The 2GIG EDGE Panel displays a visual trouble indicator after a cellular radio network failure.
»
Disabled: Turns the feature OFF. The 2GIG EDGE Panel will not display a visual indicator after a cellular radio network failure.
NOTE: Regardless of the setting selected here, a radio network failure will always be logged in the System History.
Once the network connection is restored, the system automatically clears the visual indicator. A record of the trouble alert condition is stored in
the System History.

Q403: Radio network failure reports

Configures the system to transmit a trouble report to the Central Station when the system detects a cellular radio network failure.
Choose one of these options:
»
† Enabled: Turns the reporting feature ON. The 2GIG EDGE Panel will transmit a trouble report to the Central Station after a cellular
radio network failure.
»
Disabled: Turns the reporting feature OFF. The 2GIG EDGE Panel will not transmit a trouble report to the Central Station after a cellular
radio network failure.

Q404: Broadband network failure time in minutes

Configures the system to display a trouble alert on the touchscreen when the system loses its broadband network connection. The number of
minutes you specify here defines the amount of down time that must pass before the system issues a trouble alert report. Once the broadband
connection is restored for five (5) minutes, the trouble condition automatically clears itself.
Choose one of these options:
»
0 minutes: Turns the feature OFF. The system does not issue a trouble alert
»
1-255 minutes: Turns the feature ON. Use the touchscreen's numeric keypad to enter the number of minutes between 1 and 255
»
† 30 Minutes: Turns the feature ON and issues a trouble alert on the 2GIG EDGE Panel after 30 minutes of down time.

Q405: Broadband network failure causes trouble

Configures the system to display a trouble alert on the touchscreen when it logs a trouble alert condition with the broadband network connection.
The 2GIG EDGE Panel will display an alert message on the touchscreen after the number of minutes specified in
above expires.
time, in minutes (0-255)
Choose one of these options:
»
† Enabled: Turns the feature ON. The 2GIG EDGE Panel displays a visual trouble indicator after the broadband network failure.
»
Disabled: Turns the feature OFF. The 2GIG EDGE Panel will not display a visual indicator after a broadband network failure. Once the
network connection is restored, the system automatically clears the visual indicator. A record of the trouble alert condition is stored in the
System History.

Q406: Broadband network failure reports

Configures the system to transmit a trouble report to the Central Station when the system detects a broadband network connection.
Choose one of these options:
»
† Enabled: Turns the reporting feature ON. The 2GIG EDGE Panel will transmit a trouble report to the Central Station after a broadband
network failure.
»
Disabled: Turns the reporting feature OFF. The 2GIG EDGE Panel will not transmit a trouble report to the Central Station after a
broadband network failure.
Installation Guide for the 2GIG EDGE Security Panel
52
Q401: Radio modem network failure
Q404: Broadband network failure