Panel Programming - Network Settings - 2gig Technologies EDGE Installation Manual

Transmission Delay
1 . Tap Transmission Delay.
2 . Tap Enabled or Disabled.
3 . Tap  to move to the next option.
Sensor Reports
1 . Tap Sensor Reports.
2 . Tap Enabled or Disabled.
3 . Tap  to move to the next option.
Sensor Supervised
1 . Tap Sensor Supervised.
2 . Tap Enabled or Disabled.
Reset Keypad/Next Keypad
¾ Tap RESET ZONE to erase all the programmed settings for the zone.
¾ Tap NEXT ZONE to program another Image Sensor.
P P – n
anel rogramming etWorK
Wireless Network
1 . Tap an available Wireless Network Name.
2 . Correctly enter the assigned network password to connect.
3 . Tap  to go back to the Network Settings menu.
4 . Enter network password at the Keyboard Entry Screen, and
tap CONNECT.
s
ettings
39
Copyright © 2022 Nortek Security & Control LLC