Panel Programming - Wireless Zones - 2gig Technologies EDGE Installation Manual

5 . Tap Panel Programming to view programming options (see below).
P P – W
anel rogramming
You can program up to 100 wireless zones per system. To get started, tap Wireless Zones to view the Wireless Zones screen.
Selecting a Wireless Zone
1 . On the left side of the Wireless Zones screen, swipe up or down to scroll
the list of zones.
2 . Tap and highlight one of the available zones.
3 . Tap EDIT ZONE to view settings for the selected zone.
Equipment Code
1 . Tap Equipment Code.
≡
2 . Tap
to expand the list.
3 . Tap to select the desired equipment code from the list.
4 . Tap  to move to the next option.
Sensor Type
1 . Tap Sensor Type.
≡
2 . Tap to expand the list.
3 . Tap to select the appropriate sensor type from the list.
NOTE: You can also use the keypad to enter the two-digit
code to display a Sensor Type.
4 . Tap  to move to the next option.
Sensor Equipment Type (if needed)
If you selected
04-Interior Follower
in "Sensor Type" above, you must also select this option (
Type
Installation Guide for the 2GIG EDGE Security Panel
Z
ireless ones
, ,
06-24-Hour Silent Alarm 07- 24-Hour Audible Alarm
,
24-Hour Auxiliary Alarm
).
continued next page
28
, ,
10-Interior with Delay 23-No Response