2gig Technologies EDGE Installation Manual page 38

Voice Descriptor
1 . Tap EDIT VOICE DESCRIPTOR.
2 . Use the keypad to enter the first few letters of the desired word.
3 . Tap the matching word above the keypad.
4 . Repeat the steps above to enter a phrase.
5 . Tap DONE.
6 . Tap  to move to the next option.
Sensor Chime
1 . Tap Sensor Chime to assign a sound to the Image Sensor.
2 . Tap  to move to the next option.
Sensitivity
1 . Tap Sensitivity, then select High, Normal or Low.
2 . Tap  to move to the next option.
Smart Area Assignment
1 . Tap Smart Area Assignment, then assign the Image Sensor to a particular Smart
Area zone (S1, S2, S3 or S4).
2 . Tap  to move to the next option.
Installation Guide for the 2GIG EDGE Security Panel
38