B - Two-Dimensional Bar Codes, General Part - Intermec EasyCoder PD4 Programmer's Reference Manual

Chapter —Commands
b – Two-Dimensional Bar Codes, General Part
This command is used to print two of three complex bar codes;
Description
Data Matrix, PDF417, MaxiCode, and QR Code. The command
consists of two parts; a leading set of general positioning and bar
type select parameters, and a trailing code-specific part defining
the bar code's appearance and its input data.
The general part of the syntax is indicated by italic characters in
the code-specific syntax descriptions on the following pages.
Syntax
bp
1
Parameters p
1
p
2
p
3
[code specific options], see the following two pages.
The standard program packages contains all the two-dimensional
Remarks
bar code mentioned above.
42 ESim v5.12 for EasyCoder PD4—Programmer's Reference Manual
,p ,p ,[code specific options]
2 3
Horizontal start position (X) in dots.
Vertical start position (Y) in dots.
Code type:
D Selects Data Matrix
M Selects MaxiCode
P Selects PDF417
Q selects QR Code