Error Replies - Intermec EasyCoder PD4 Programmer's Reference Manual

Appendix A — Error-Handling
Error Types
Classified types of error & status codes for the Error Replies table later in
this appendix.
Type Feature
A Minor Error
of command
sequences and
similar.
B Print Stop-
ping Error.
C Paper End
Stopping
Error.
D Error of
printing func-
tionality and
status.
E Status
changes.
F Unrecoverable
Error.
G Various modes
152 ESim v5.12 for EasyCoder PD4—Programmer's Reference Manual
Generates
At Error reporting (cmd
US): Sets error on print
command and sets Error
LED to solid red.
At no Error reporting (cmd
UN): sets Ready LED to
green at print command
Sets Error LED to solid red
Sets Error LED to solid red
at print.
Sets Error LED directly to
red, sometimes blinking.
No LED change.
Sets Error LED directly to
red.
Recovered by
At Error reporting (cmd US):
Press Feed key orsend Reset
command ^@. Also see cmd
USA.
At No Error reporting (cmd
UN): No recover necessary,
already done.
Feed Key or command Reset
^@.See also command USB.
Load new media and press
Feed key or send Reset com-
mand ^@.
Manual or automatic (tem-
perature lowered) measure or
send Reset command ^@.
No recover necessary/Delete
Label from LTS. See also com-
mand USE.
Power Off/Power On or send
Reset command ^@.
Not applicable