Up - Code Page & Memory Inquiry/Print - Intermec EasyCoder PD4 Programmer's Reference Manual

Chapter —Commands
UP – Code Page & Memory Inquiry/Print
This command will cause the printer to print and send the cur-
Description
rently selected code page and memory status to the host through
the RS-232 or USB port.
Syntax
UP
The printer will:
• Send information on the currently selected code page and
• Print the current printer configuration (same as U command).
The format of the data sent to the host is as follows:
UMp
Parameters
p
1
p
2
p
3
p
4
p
5
p
6
p
7
p
8
p
9
p
10
p
11
Example
UP↵
Also see I, U,UI, and UM commands.
114 ESim v5.12 for EasyCoder PD4—Programmer's Reference Manual
memory status back to the host (same as UM command).
,p ,p ,p ,p ,p
1 2 3 4 5
Image buffer size in kilobytes.
Total User Flash-memory size for [Form + Graphic + External font +
Asian Font] in kilobytes incl. decimals.
Form memory used in kilobytes. decimals = forms file counter
Graphic memory allocation size in kilobytes.
Graphic file counter.
External font memory allocation size in kilobytes.
External font file counter
Number of data bits.
Code page.
Country code.
Asian Font file flag & used memory in kilobytes;
Annn = Chinese traditional
Bnnn = Chinese simplified
Cnnn = Japanese
Dnnn = Korean
where nnn = memory used in kilobytes for Asian font
:Returns memory status and current code page
,p UIp p ,p [,p
6 7 8 9 10
and prints configuration on label.
]
11