N - Clear Image Buffer - Intermec EasyCoder PD4 Programmer's Reference Manual

N – Clear Image Buffer
This command is used to clear the image buffer before building
Description
a new image. It also clears any error list that not yet has been
presented.
Syntax
N
The N command is essential when printing labels in the Direct
Remarks
Mode. It is not necessary to use an N command before printing
a form. An N command must not be used inside a form in the
Form Edit Mode.
Example
N↵
ESim v5.12 for EasyCoder PD4—Programmer's Reference Manual
Chapter —Commands
:Clears image buffer
5