Fr - Retrieve Form - Intermec EasyCoder PD4 Programmer's Reference Manual

FR – Retrieve Form
This command is used to retrieve a form that was previously
Description
stored in memory.
Syntax
FR"name"
Parameters "name"
To print a list of the forms currently stored in memory, use the
Remarks
FI command.
Example
FR"Test1"↵
ESim v5.12 for EasyCoder PD4—Programmer's Reference Manual
This is the form name used when the form was stored. T he printer is case -sen-
sitive, that is, the use of upper and lower case letters must match the original
name.
Chapter —Commands
:Retrieves the form named "Test1"