Error Replies - Intermec EasyCoder PD4 Programmer's Reference Manual

Error Replies

Explanation of text in the table on the next page:
Error
Code
Type
Description
Error Response... Response depending on Error reporting flag controlled by US &
LED
Serial
Response at ^ee
<LF>
<CR>
<CRLF>
<XON>
<XOFF>
<NAK>
-
[XOFF]
Command eRF,6,N substitutes at error reply <XOFF> with
Example
the character 'F' and at error recovery <XON> with the character
'N'.
ESim v5.12 for EasyCoder PD4—Programmer's Reference Manual
Referred error number divided in Code and Type.
Referred error number
Letter is a classifying of error.
Short human explanation
UN.
Designation and color
Ready Green (GRN)
Error Red (RED)
Error Blinking Red (BLNK RED)
Output on Serial line (RS-232 or USB) at error response.
Output on serial line of error number, if only one error is available.
0x0a
0x0d
0x0d + 0x0a
0x11
0x13
0x15
Nothing happens
Flag for waiting on Error recovery. Default value is <XOFF> =
0x13 , but can be substituted with command eRp1,6,p
is replacement of <XOFF> and where p
Appendix A — Error-Handling
where p
3
is replacement of <XON>.
3
1
15