B - Standard Bar Codes - Intermec EasyCoder PD4 Programmer's Reference Manual

B – Standard Bar Codes
This command is used to print standard bar codes.
Description
Syntax
Bp
1
Parameters p
1
p
2
p
3
p
4
p
5
p
6
p
7
p
8
"DATA"
ESim v5.12 for EasyCoder PD4—Programmer's Reference Manual
,p ,p ,p ,p ,p ,p
2 3 4 5 6
Horizontal start position (X) in dots.
Vertical start position (Y) in dots.
0 No rotation.
1 90 degrees rotation clockwise.
2 180 degrees rotation clockwise.
3 270 degrees rotation clockwise.
Bar code select. See Bar Code T ype table below.
Narrow bar width in dots. See Bar Code T ype table below.
Bar Code Type
Code 39 std. or extended
Code 39 with check digit
Code 93
Code 128 UCC case code
Code 128 A, B, C
Codabar
EAN8
EAN8 2 digit add-on
EAN8 5 digit add-on
EAN13
EAN 13 2 digit add-on
EAN13 5 digit add-on
Interleaved 2 of 5
Interleaved 2 of 5 with check digit
Interleaved 2 of 5 w human readable check digit
Postnet 5, 6, 8 & 11 digit
UCC/EAN 128
UPC A
UPC A 2 digit add-on
UPC A 5 digit add-on
UPC E
UPC E 2 digit add-on
UPC E 5 digit add-on
UPC SCC
Wide bar width in dots (2 -30).
Barcode height in dots.
B Human readables ON.
N Human readables OFF.
Represents a fixed data field.
Chapter —Commands
,p ,"DATA"
7 8
"p " "p "
4 5
3 1-10
3C 1-10
9 1-10
0 1-10
1 1-10
K 1-10
E80 2-4
E82 2-4
E85 2-4
E30 2-4
32 2-4
E35 2-4
2 1-10
2C 1-10
2D 1-10
P n.a.
1E 1-10
UA0 2-4
UA2 2-4
UA5 2-4
UE0 2-4
UE2 2-4
UE5 2-4
2U 1-10