W - Windows Mode - Intermec EasyCoder PD4 Programmer's Reference Manual

W – Windows Mode
This command is used to enable/disable the Windows command
Description
mode (special applications only).
Syntax
Wp
1
Parameters p
1
When enabled, the printer will accept Windows mode escape
Remarks
sequences to print data. When disabled, escape sequences will be
ignored up to the next linefeed.
The Windows mode escape sequences are only used by the Win-
dows Printer Driver. When working with a main frame or other
non-Windows host, this mode can be disabled to prevent erratic
operation.
Examples
WY↵
WN↵
ESim v5.12 for EasyCoder PD4—Programmer's Reference Manual
Windows Mode enable/disable:
Y Enables W indows Mode.
N Disables W indows Mode (default).
Chapter —Commands
:Enables Windows Mode
:Disables Windows Mode
11