Example - Intermec EasyCoder PD4 Programmer's Reference Manual

Chapter —Retrieving and Printing a Form

Example

The form "TEST", edited in the previous chapter, can be retrieved and
printed from any ASCII sending device using this sequence:
Command
↵
FR"TEST"↵
?↵
EASYCODER↵
501SA↵
Dan↵
100000↵
P1,2
In this example we have manually substituted variables for testing pur-
poses.
Note: It is critical to the syntax to send exactly the same
number of variable lines as defined for this label form.
2 ESim v5.12 for EasyCoder PD4—Programmer's Reference Manual
Explanation
CR/LF to start command structure
Retrieve form
Call for variables
Substitute variable V00
Substitute variable V01
Substitute variable V02
Counter start value C0
Print 2 copies of a single label