Tt - Define Time Format - Intermec EasyCoder PD4 Programmer's Reference Manual

TT – Define Time Format
This command is used to define the time format when printing.
Description
Syntax
TTp
Parameters
p –p
1
Default:
This command works only if the printer is fitted with an optional
Remarks
real-time clock circuit (RTC).
If the current time is 1:25:00 PM:
Example
TTh:m:s↵
TTh:m:s+↵
TTh,m↵
TTh+↵
ESim v5.12 for EasyCoder PD4—Programmer's Reference Manual
[/p /p ][+]
1 2 3
These p arameters d escribe t he f ormat o f t he t ime d isplay. A t l east o ne p arameter
3
must be supplied. Each parameter can be any of the acceptable values listed
below:
h Hours displayed as 2 digits, for example 12
m Minutes displayed as 2 digits, for example 15
s Seconds displayed as 2 digits, for example 00
/ Represents an optional separator character, which can be any character
in the range between ASCII 32 dec. and ASCII 63 dec. The separator is
printed between the results of each of the supplied parameters.
+ Optionally s elects 1 2-hour m ode, w here t he t ime w ill b e a ppended w ith
an " AM" or " PM" indicator. If there is no trailing + sign in command, 24-
hour mode will be selected.
h:m:s
Chapter —Commands
:Prints as 13:25:00
:Prints as 01:25:00 PM
:Prints as 13,25
:Prints as 01 PM
105