Intermec EasyCoder PD4 Programmer's Reference Manual page 27

Name the Form
Name of this form is TEST.
Command
↵
FK"TEST" ↵
FS"TEST" ↵
Define Variables
The first variable (V00) has a maximum size of 15 characters.
The second variable (V01) has 10 characters and prints in reverse.
The third variable (V02) has a maximum size of 8 characters.
Command
V00,15,N,"Enter Product name:" ↵
V01,10,L,"Enter Model number:" ↵
V02,8,N,"Checked by:" ↵
The text within quotes are prompts, which will be sent from the printer
to the host when the label form is retrieved (serial communication only).
Define a Counter
The counter has maximum 6 digits.
Command
C0,6,L,+1,"Enter Serial Number:"↵
Note: The variables (V00, V01, V02) and counter (C0), are
defined within this label form named TEST. The next label
form containing variables and counters, will again start with
V00 and C0. If variable data is being sent from an external data
base, omit the text between the quotes and replace with a space
character, for example
ESim v5.12 for EasyCoder PD4—Programmer's Reference Manual
Chapter 5—Editing in Form Edit Mode
Explanation
CR/LF to start command structure
Delete any existing form named TEST
Start store form named TEST
Explanation
Define first variable
Define second variable
Define third variable
Explanation
Define counter
.
V00,15,N," "
21