Um - Code Page & Memory Inquiry - Intermec EasyCoder PD4 Programmer's Reference Manual

Chapter —Commands
UM – Code Page & Memory Inquiry
This command will cause the printer to send the currently
Description
selected code page and memory status to the host through the
RS-232 or USB port.
Syntax
UM
The printer will send information on the currently selected code
page and memory status back to the host in the following format:
UMp
Parameters
p
1
p
2
p
3
p
4
p
5
p
6
p
7
p
8
p
9
p
10
p
11
Example
UM↵
UM1050,998.0,8.3,40,1,37,2 UI80,001,B581
I, U, UI, and UP commands.
Also see
112 ESim v5.12 for EasyCoder PD4—Programmer's Reference Manual
,p ,p ,p ,p ,p
1 2 3 4 5 6
Image buffer size in kilobytes.
Total User Flash-memory size for [Form + Graphic + External font +
Asian Font] in kilobytes incl. decimals.
Form memory used in kilobytes. decimals = forms file counter
Graphic memory allocation size in kilobytes.
Graphic file counter.
External font memory allocation size in kilobytes.
External font file counter
Number of data bits.
Code page.
Country code.
Asian Font file flag & used memory in kilobytes;
Annn = Chinese traditional
Bnnn = Chinese simplified
Cnnn = Japanese
Dnnn = Korean
where nnn = memory used in kilobytes for Asian font
,p UIp p ,p [,p
7 8 9 10
:Returns memory status and current
code page, for example:
]
11